Remote management port Routers | Voters

Remote management port Routers

planned

Frank Ferreira

The port defaults to 7000 when enabled. If you change it to ANYTHING but 80 it will loose access to OVRC remote connection as when it creates the tunnel to view the router it does so only over port 80.

April 1, 2020

Yo'el Erez

I really hope this gets fixed soon. Telling OvrC to scan for the new port works sometimes but it should be automatically pulling from the router if it can, especially for Araknis routers.

Chris Schleich

As a work around you can add port 7000 or whichever number you are using for your routers to OVRC Port Scan.  Set the port type to HTTPS and use "router" as your description.  Do a network scan at the location so that ports update on devices in ovrc.  You will be able to connect to the router on that port now. 
What I think is happening: 
Once you enable https in the router, port 80 is no longer accessible and port 7000 is not in the network port scan for ovrc by default.  This leaves you with no access to the router remotely unless you add the port to be scanned.

James Zabel

marked this post as

planned

We'll be investigating this issue.